|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
| Motor Specifications Kv = 960 rpm/volt Stator diameter = 26mm Stator lemgth = 36mm Length = 69.6mm Outside Diameter = 37.8mm Weight = 268g Continuous current accepted = 35-45A Maximum load = 65A for 20 seconds Shaft = 5mm carbonised steel Motor fixing = four 3mm bolts Male bullet connectors fitted to rear of motor Female bullets for ESC supplied Recommended controller 2-3S = Hifei 65A, Hifei 80A SBEC or Hyperion 90A SB Recommended controller 4S = Hifei 65A, Hifei 80A SBEC or Hyperion 90A SB |
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
![]() |
|||||||||||||||||||||||||||||||||||||||
| An outrunner brushless motor in a case for hot applications for R/C aircraft up to 2.0 kg powered by 7-12 cells or 3-4S LiPo; suitable for aerobatic models and hot gliders. No gearbox is required because of the high torque of this motor type. This version is a SPORT or GLIDER motor - that means it has an integral fan to cool the motor while running - good for extended running or enclosed glider noses.
The 5.6 series of motors from MVVS all have 26mm diameter stators - there are 12 poles or magnets. Prop for 3S - 14x7" Price = $185 |
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||