 |
|
||
Scorpion 2215-18 outrunner motor |
| Home |
| Answers |
| Set-ups |
| Products |
| News |
| History |
| How to Order |
|
Peter Pine PO Box 1050 E-mail: ppine@northnet.com.au |
| Back to Scorpion Motors Page |
Io = 0.68 at 10V
Kv = 1131 rpm/volt
R = 0.097 Ohms
Length = 27.6mm
Diameter = 27.9mm
Weight = 61.9g
Continuous current accepted = 20A
Maximum continuous power = 210W
Shaft = 3mm carbonised steel (protrudes both ends)
Collet-type prop adaptor and back-mount supplied
Motor fixing = four 3mm bolts supplied
Male bullet connectors fitted to motor
Female bullet connectors & backmount supplied
Recommended controller = Scorpion 35A
The S22 series of motors from Scorpion all have 22mm diameter stators - there are 12 stator arms and 14 magnets in the rotor housing. The stator is 15mm long in this 2215 version. The motor wind is an 18 turn delta wind with 4 strand 0.23mm wire.
Prop for 2S - 12x6"
Prop for 3S - 10x6"
Motor guaranteed for two years
Price now = $65
| Some power recommendations | ||||||||
| Prop | Prop type | Volts | Cells | Revs per minute | Amps | Watts In | Thrust Grams | Recommended controller |
| 10x5 | APC | 7 | 2S | 6,350 | 10A | 67 | 490 | Scorpion 25A |
| 11x5.5 | APC | 7 | 2S | 7,475 | 12.5A | 87 | 524 | Scorpion 25A |
| 11x7 HD | GWS | 7 | 2S | 5,525 | 13.2A | 92 | 643 | Scorpion 25A |
| 10x5 | APC | 10.5 | 3S | 8,350 | 17A | 178 | 964 | Scorpion 25A |
| 11x5.5 | APC | 10.5 | 3S | 7,250 | 20A | 212 | 916 | Scorpion 25A |
| 11x7 HD | GWS | 10.5 | 3S | 7,000 | 21A | 221 | 1077 | Scorpion 25A |
| 10x5 | APC | 14.0 | 4S | 9,725 | 24A | 329 | 1372 | Scorpion 35A |
Axi 2217/16, 1050 KV
Hacker A20-20L, 1022 KV
Himax or Himark HC2816-1220
Torque 20/1030
Venom V28L, 1275 KV
Click here for more information on the Scorpion 2215-18.
Click here for a more extensive Prop Data chart for the Scorpion 2215-18.