 |
|
||
Scorpion 2215-22 outrunner motor |
| Home |
| Answers |
| Set-ups |
| Products |
| News |
| History |
| How to Order |
|
Peter Pine PO Box 1050 E-mail: ppine@northnet.com.au |
| Back to Scorpion Motors Page |
Io = 0.52A at 10V
Kv = 940 rpm/volt
R = 0.132 Ohms
Length = 27.6mm
Diameter = 27.9mm
Weight = 61.3g
Continuous current accepted = 16A
Maximum continuous power = 180W
Shaft = 3mm carbonised steel (protrudes both ends)
Collet-type prop adaptor and back-mount supplied
Motor fixing = four 3mm bolts supplied
Male bullet connectors fitted to motor
Female bullet connectors & backmount supplied
Recommended controller = Scorpion 25A
The S22 series of motors from Scorpion all have 22mm diameter stators - there are 12 stator arms and 14 magnets in the rotor housing. The stator is 15mm long in this 2215 version. The motor wind is a 22 turn delta wind with 6 strand 0.19mm wire.
Prop for 2S - 12x8"
Prop for 3S - 11x5.5"
Motor guaranteed for two years
New super-low price posted 18-5-08! Price now = $53
| Some power recommendations | ||||||||
| Prop | Prop type | Volts | Cells | Revs per minute | Amps | Watts In | Thrust Grams | Recommended controller |
| 10x5 | APC | 7 | 2S | 5,500 | 6A | 41 | 354 | Scorpion 25A |
| 11x5.5 | APC | 7 | 2S | 5,025 | 8A | 56 | 374 | Scorpion 25A |
| 11x7 HD | GWS | 7 | 2S | 4,900 | 8.4A | 59 | 481 | Scorpion 25A |
| 10x5 | APC | 10.5 | 3S | 7,425 | 11A | 114 | 726 | Scorpion 25A |
| 11x5.5 | APC | 10.5 | 3S | 6,625 | 14A | 144 | 748 | Scorpion 25A |
| 11x7 HD | GWS | 10.5 | 3S | 6,350 | 14A | 150 | 868 | Scorpion 25A |
| 10x5 | APC | 14.0 | 4S | 8,925 | 16A | 222 | 1114 | Scorpion 25A |
Axi 2217/20, 840 KV
Hacker A20-22L, 924 KV
Himax or Himark HC2816-0890
Torque 22/930
Venom V28L, 750 KV
E-Flite Park 450, 890 KV
Click here for more information on the Scorpion 2215-22.
Click here for a more extensive Prop Data chart for the Scorpion 2215-22.