Io = 2.45A at 10V
Kv = 1187 rpm/volt
R = 0.038 Ohms
Length = 31.9mm
Diameter = 37.5mm
Weight = 122g
Continuous current accepted = 43A
Maximum continuous power = 600W
Shaft = 5mm carbonised steel (protrudes both ends)
Collet-type prop adaptor and back-mount supplied
Motor fixing = four 3mm bolts supplied
Male bullet connectors fitted to motor
Female bullet connectors & backmount supplied
Recommended controller = Scorpion 55A
|A sports LRK (outrunner) brushless motor for small R/C aircraft up to 2.5 kg powered by 10-12 cells or 3-4S LiPo; suitable for cabin models, scale models, aerobatic models and gliders. No gearbox is required because of the high torque of this motor type.
All Scorpion 30mm motors have 3 ball bearings to support the rotating housing.
The S30 series of motors from Scorpion all have 30mm diameter stators - there are 12 stator arms and 14 magnets in the rotor housing. The stator is 14mm long in this 3014 version. The motor wind is a 16 turn delta wind with 15 strand 0.21mm wire.
Prop for 3S - 11x7."
Motor guaranteed for two years
No longer available
|Motors that compare to the Scorpion 3014-16:
Axi 2814/12, 1390 KV
Dualsky XM3536CA-6, 1330 KV
Hacker A30-12M, 1370 KV
HXT 35-36B, 1300 KV
Venom V35, 1575 KV
Click here for more information on the Scorpion 3014-16.
Click here for a more extensive Prop Data chart for the Scorpion 3014-16.