|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Motor Specifications Io = 1.06A at 10V Kv = 830 rpm/volt R = 0.042 Ohms Length = 39.7mm Diameter = 37.5mm Weight = 129g Continuous current accepted = 30A Maximum continuous power = 550W Shaft = 5mm carbonised steel (protrudes both ends) Collet-type prop adaptor and back-mount supplied Motor fixing = four 3mm bolts supplied Male bullet connectors fitted to motor Female bullet connectors & backmount supplied Recommended controller = Scorpion 45A |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A sports LRK (outrunner) brushless motor for small R/C aircraft up to 2.5 kg powered by 10-12 cells or 3-4S LiPo; suitable for cabin models, scale models, aerobatic models and gliders. No gearbox is required because of the high torque of this motor type.
All Scorpion 30mm motors have 3 ball bearings to support the rotating housing. The S30 series of motors from Scorpion all have 30mm diameter stators - there are 12 stator arms and 14 magnets in the rotor housing. The stator is 14mm long in this 3014 version. The motor wind is a 16 turn delta wind with 9 strand 0.25mm wire. Prop for 3S - 13x6.5" Motor guaranteed for two years Price = $77 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| For more extensive prop data, click on this link.
Motors that compare to the Scorpion 3014-830: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||