|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Motor Specifications Io = 1.90A at 10V Kv = 890 rpm/volt R = 0.020 Ohms Length = 45.7mm Diameter = 37.5mm Weight = 166g Continuous current accepted = 45A Maximum continuous power = 780W Shaft = 5mm carbonised steel (protrudes both ends) Collet-type prop adaptor and back-mount supplied Motor fixing = four 3mm bolts supplied Male bullet connectors fitted to motor Female bullet connectors supplied Recommended controller = Scorpion 55A |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| A sports LRK (outrunner) brushless motor for small R/C aircraft up to 3.0 kg powered by 10-16 cells or 3-5S LiPo; suitable for cabin models, scale models, aerobatic models and gliders. No gearbox is required because of the high torque of this motor type.
All Scorpion 30mm motors have 3 ball bearings to support the rotating housing. The S30 series of motors from Scorpion all have 30mm diameter stators - there are 12 stator arms and 14 magnets in the rotor housing. The stator is 20mm long in this 3020 version. The motor wind is a 10 turn delta wind with 14 strand 0.25mm wire. Prop for 3S - 13x8" Motor guaranteed for two years Price = $83 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| For more extensive prop information, click on this link.
Motors that compare to the Scorpion 3020-14: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||