Electric Flight in Australia

Hyperion Controllers

Home

Answers

Set-ups

Products

News

Peter Pine

PO Box 1050
Kingscliff 2487
Phone (02) 6674 0397
Fax (02) 6674 2037

E-mail: ppine@northnet.com.au

Back to Speed Controllers Main Page

Hyperion controllers offer you the latest trends in brushless motor controllers at an economy price. They are made in Hong Kong by the same company that makes the famous Emeter designed by Phil and Mark Connolly in Australia, and are compatible with the Emeter (for programming purposes). Study the range of features below, and then check the price - and be amazed!
Features include: Programmable by Tx stick, Emeter, or PC (cables required - for Emeter $5.00, for PC (serial port shown in photo) - USB connector now available for $24.70 BEC available Over temperature protection - soft cut-off at 80 degrees C RPM governor (adjustable) to protect from motor over-run Selectable switching frequency 8 kHz or 16 kHz (efficiency gains possible at higher frequency with high pole motors such as outrunners) Battery selection - NiCd & NiMH, or 2S LiPo, or 3S LiPo Adjustable motor timing (auto, 7 degrees, 30 degrees) Motor reversible by programming Selectable brake mode - off, and hard or soft brake Soft start also available - on or off
Extra features accessible when programming from Emeter or PC: Set NiCd and NiMh cell cut-off voltage per cell - 4 options Set LiPo cell cut-off voltage per cell - 5 options

Titan 10 P: brushless BEC controller for indoor and park fliers - accepts 10A continuous and 12A for short periods with 5-10 cells or 2-3 LiPo. Size 22 x 21 x 5.5mm. Weight 13g with cut-off switch.	$63.00
Titan 20 P: brushless BEC controller for indoor and park fliers - accepts 20A continuous and 24A for short periods with 5-10 cells or 2-3 LiPo. Size 38 x 24 x 7.5mm. Weight 21g with cut-off switch.	$78.00
Titan 30 P: brushless BEC controller for park fliers and smaller models - accepts 30A continuous and 36A for short periods with 5-10 cells or 2-3 LiPo. Size 44 x 27 x 8mm. Weight 30g with cut-off switch.	$96.00
Titan 50 PB: brushless BEC controller - accepts 50A continuous and 60A for short periods with 5-12 cells or 2-3 LiPo. Size 58 x 27.5 x 7.5mm. Weight 41.3g with cut-off switch.	$142.00
Titan 50 PO: brushless OPTO controller - accepts 50A continuous and 60A for short periods with 5-16 cells or 2-5 LiPo. Size 58 x 27.5 x 7.5mm. Weight 38.0g.	$142.00
Titan 80 PB: brushless BEC controller - accepts 80A continuous and 96A for short periods with 5-12 cells or 2-3 LiPo.	$177.00
Titan 80 PO: brushless OPTO controller - accepts 80A continuous and 96A for short periods with 5-16 cells or 2-5 LiPo.	$177.00
Titan 85 HV: brushless OPTO controller - accepts 85A continuous and 100A for short periods with 16-30 cells or 5-10 LiPo.	$337.00
Titan 90HV-PO: brushless OPTO controller for up to 10S LiPo and 90A continuous.	$369.00

Titan Cool BEC - switching regulator to supply 5V or 6V (switchable) to your receiver from your main flight pack - connects to the balance plug on your LiPo battery (plug required as an extra) - the great benefit is that this unit works from 3S to 10S!! Noise elimination technology overcomes interference - will supply 4A continuous and 5A peak - works with up to 8 standard servos (or 6 digital). Photo below:	$49.00