Electric Flight in Australia

 

Hyperion Receivers

Home
Answers
Set-ups
Products
News
History
How to Order
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
 
 
 
 
  
 
Peter Pine
PO Box 1050
Kingscliff NSW 2487
Phone (02) 6674 0397
Fax (02) 6674 2037
E-mail: ppine@northnet.com.au 
   
 
 
 
Back to Radio Gear Main Page 
Hyperion Receivers
Hyperion Berg DSP receivers
Hyperion have excelled themselves - this manufacturer of the Emeter has come up with an advanced range of radio receivers at excellent prices. These receivers are single conversion, but use Berg DSP technology - they check the quality of the incoming signal and clean them up. Any bad signals are rejected.

There is also a Transmitter Signal Recognition system which learns the signal characteristics of your transmitter and rejects signals from other transmitters.

And there is more - all brands of radio have a specific amount of signal shift (that's why the frequency of the Rx crystal is really different to that of your Tx crystal). The Hyperion receivers automatically detect the signal shift of your transmitter and adjust for this characteristic. This means that they are compatible with all brands of transmitter, despite different signal shift characteristics.

These new technology receivers give you the best chance of avoiding interference that is around today.

DSP Berg 4 channel Rx
This is a tiny, tiny receiver that is full range but will fit the smallest aircraft:
Size - 20mm x 44mm x 10mm
Weight - 7g
Standard 3-pin servo connection - double horizontal layout
Ultra narrow band - triple filter front end
DSP microprocessor only allows good signals through
Micro crystal required
Price - NOW ONLY $85.00

Berg 36MHz micro crystals are available on all odd number channels from Ch.605 to Ch.655 for the tiny price of $13 - GWS micro crystals are also compatible.

DSP Berg 6 channel Rx
This is a 6 channel version with the same technology - plus extra features:
Size - 21mm x 48mm x 13mm
Weight - 12g
Channel 5 programmable to accept Channel 7 signals
Programmable fail safe - signal hold or neutral
Narrow band - 5 Khz or better
Sensitivity - 2 uV
Triple filtered front end
Decoder has adaptive algorithms based on the signal/noise ratio of the received signal
Auto-detect signal shift polarity
Accepts full size crystals
Price - NOW ONLY $99

Berg 36MHz full size crystals also available on all frequencies from Ch.605 to Ch.655 for $14.

DSP Berg 8 channel Rx
An 8 channel version with all the same features - just slightly larger:
Size - 24mm x 40mm x 13mm
Weight - 12.5g
Shielded servo pins
Channel 5 programmable to accept Ch.9 signals
Price - NOW ONLY $109.00