CM Pro Discus - 2.65m scale glider

The kit is a glider version - you can fly it from the slope, add a tow-hook for launch by winch, or add a nose release and go aero-towing. But this kit is just itching to be converted to electric power. The nose is a classic spinner shape, so you can just cut off the nose at the required location, add a nose former on which to mount an outrunner electric motor and self launch with quiet and clean electric power.
 
Wingspan - 2652mm
Length - 1153mm
Weight - 1100 - 1200g for the glider version - plenty of scope to add electrics for this size model
Controls - ailerons, rudder, elevator, motor
Fuselage - fibreglass painted white
Flying surfaces - traditional timber construction covered in white to match the fuselage
Wing has three joiner rods - wing and tail lock in place with bolts - nuts already fitted
Hardware pack included
Blue PVC canopy with canopy latch
Plenty of internal room for all equipment
Recommended brushless outrunner motor - Scorpion 3020-14 outrunner
Recommended prop - AN-13x8 folder
Recommended LiPo battery for outrunner - Hyperion LVX2200-3S
Recommended speed controller - Scorpion Commander 55A
.
The CM Pro Discus CS kit is still available at $249
The special has now ended (message posted 16-9-08).