Poly Pulsar electric glider

The Poly Pulsar is made in the Ukraine by free flight modellers who know how to build strong and light. The total weight of this kit is 300g. That's right, only 300g!! And that's for a 2.0m glider!

The wing is a three-piece unit of carbon construction with balsa ribs capped with carbon strip, and already covered in Oracover Lite. The leading edge is all carbon weave cloth back to the spar. The trailing edge is a thin strip of carbon. The joiners are alloy rods. The wing section is an AG5 - thin (fast climb) and slightly undercambered (great glide).

The fuselage pod is made from carbon and painted white. There is a removable nose cone which carries the battery pack on a tray. The fibreglass nose former is already fitted and strengthened. The tail boom is a rolled carbon tube.

Other accessories include control horns and carbon fairings for aileron and flap servos. The Poly Pulsar can pack flat in a box for transport or storage.

Controls are rudder/elevator (two 9g servos) and flaps (one servo). Sub-micro 9g servos like the JR-375 or the Protech B109 are recommended.

A Hyperion G2213 or G2220, Kontronic Fun geared 400 or 480, or a geared Hacker B20, would suit the Poly Pulsar. For a brushed motor, a Speed 400 with MP-Jet gearbox would fly this aircraft very well, and then you could use a lightweight Schulze controller for brushed motors.

Wingspan - 1950mm
Wing section - AG 25
Kit weight - 300g
Weight complete - 600-800g
Motor - see recommendations above
.
Poly Pulsar 2006 - $750.

I am now an agent for all Star flight kits made in Russia. See the Star Flight web site for all the possibilities - click this link.