Pulsar 3200 glider kit

The wing is in three pieces with a flat centre panel mounted on a slight pylon to enable a flap to be operated by one servo. This gives the ability to employ crow-braking for effective landing control (flap down, ailerons up, compensating elevator). A well-tuned model with this feature is a delight to land on a chosen spot.

Carbon/kevlar/balsa construction has been used throughout to give great strength with minimal weight.

If you are looking for a superior glider, beautifully constructed, at a reasonable price, you need look no further!

This model has a cross-tail as illustrated. Also available in rudder/ elevator/ flap configuration.

Specifications are:

• wing span 3.22m
• wing section AG-25
• R/C functions: rudder, elevator, ailerons, flaps, motor control
• kit weight 760g
• flying weight 1.6kg approx.
• 3 x Hitec 85 MG servos for wings
• 2 x D60 servos for tail
• Spinner size 42mm
• realistic price for a glider of this size and calibre - completely assembled structure -
• price reduction - now $995.

• Power recommendation 1: Hyperion GS3025-4 outrunner and 7 cells or 2S with a 14x9.5" prop
  
• Power recommendation 2: Scorpion 3026-1190 outrunner and 7 cells or 2S with a 15x8" prop
  
• Power recommendation 3: Scorpion 3026-890 outrunner and 3S with a 14x7" prop
  
• Power recommendation 4: Hyperion GS3025-8 outrunner and 10 cells or 3S with a 17x8" prop
  
• Power recommendation 5: Kontronik FAI 10 with 17x11" prop on 7 cells (2S) or 16x10" on 10 cells (3S).
  
  
  Click here to go to the Esprit Models web site where you will find a link to a video clip of this model in action.
   
  
  Click here to go to the F5 site and see the whole range of Star Flight kits available.